Axon Virtual PBX

Axon Sample Configuration for using Voiceglobe service

The following information of your Voiceglobe account should be available:

Step 1 - Download and install

Download and install the Axon Virtual PBX on any Windows PC.

Step 2 - Configure Network Settings

Run the Axon PBX on your PC and press the Options button.

Go to the Network Tab of the Settings window and configure all of the entries as it is shown below. Press Ok.

Step 3 - External Lines

Login to your Axon PBX, by pressing the Web Control button. Press the External Lines link, in order to set up the connection with the Voiceglobe SIP server. Press the Add New External Line Button. Insert your Voiceglobe Account ID and Password as it is shown in the window below. Check the Use Gateway Server and import: sip1.voiceglobe.net.


Press the Advanced Line Settings button and in the SIP compatibility options put a checkmark on Relay is not required - server does it own NAT traversal. Save changes.

Step 4 - Dialing Plan

Under the Dialing Plans tab press the Add New Outbound Dialling Plan button. Give a name to your dialing plan (in our example the name is Axon).

Press Add Dial Rule and enter your prefered prefix for establishing calls with Voiceglobe (in our example the prefix is sero "0").

Step 5 - Extensions

You can configure as many extensions as you prefer under the Extensions tab.

A configuration example for an extension that supports Voiceglobe calls should look like:

*Note: This sample configuration has been tested and works fine under a private network. If you are experiencing any connection problem please configure the firewall of your router and your PC.