Grandstream HandyTone 286

Step 1 - Connect the HandyTone 286 to your network

1. Plug the cord(s) of your analogue telephone(s) on the RJ-11 FXS port at the back side of your HT286.
2. Plug a UTP Ethernet cable connected to your network (Hub, Switch or Router) on RJ-45 Ethernet port at the back side of your HT286.
3. Plug the power supply of your HT286 on the power port at the back side of your device and then on a power socket.

* If you have received a pre-configured device directly from Voiceglobe, go to step 4.

Step 2 - Verify the IP address of your ATA

The HandyTone 286 is coming standard configured with its DHCP client enabled. A DHCP sever required in your network in order to provide it with an IP address.

• Pickup the phone connected on FXS port
• Then press the red-light button on the top
• Listen the voice configuration menu and
• Dial 02 when you are prompted to "enter menu"
• Listen the IP address of your HT286

Step 3 - Use a browser to login and configure your ATA

• Open a web browser to the address: http://<IPADDRESS>/admin,
  where <IPADDRESS>is the IP address of your HT286 (found previously during the pre-configuration step 2).
• Enter the default password: Admin in order to access the next, main configuration page.

On the displayed web page set the following:

• Set SIP Server to: sip1.voiceglobe.net
• Set SIP User ID to: your Voiceglobe account (Call number): 80xxxxxx
• Set Authenticate ID to: your Voiceglobe account (Call number): 80xxxxxx
• Set Authenticate Password to: your Voiceglobe account password
• Set Name to: <YOUR name>(visible to the others when you call)
• Set (or confirm) SIP Registration to: Yes
• Set Register Expiration to: 15
• Set (or confirm) SIP Registration to: Yes
• Set (or confirm) NAT Traversal to: No

• Press the Update button at the bottom of the web page, and in the following page,
• Click on link: "Click to view your changes" to go back in the configuration page, and
• Press the Reboot button at the bottom of the web page

Step 4 - Start using your ATA

• Pick up the phone, hear the dial tone, and start dialling: